ArtDio IPF-3000 - Manual (Page 8)

Quick Installation Guide
IPF-3000
-4-
III. Basic Configuration
1. How to activate 『Main Menu』?
1. Press 【FUNC】+ 【#】 。
2. Telnet into the phone on TCP port 23. The login password is same as phone lock password,
which default is “0000”.
3. Initially, your phone can only be configured via keypad since it bears no valid IP yet. After
finishing configuring your network, you could use telnet client to configure your phone on
TCP port 23.
2. Network Settings
Please go to 『Main Menu』 =>【6.Network】/【1.General】to configure your phone based
on your network environment: DHCP, static IP or PPPoE.
(1) DHCP
z
Pick【1.Mode】/【1.DHCP】
z
Disable【4.Use static DNS】by choosing 【2.DHCP/PPPoE】
1. If you want to assign a different domain name server instead of using those
obtained by DHCP or PPPoE, you should choose【1.static DNS】and set the IP of
your specific DNS into 【6.Network】/【1.General】/【5.Static DNS】, such as
“1.Primary DNS” = 192.168.3.254*
(2) Static IP Environment（Fixed IP）
z
Pick【1.Mode】/【2.Static assign】
z
Go to【2.Static settings】, and enter your network configurations based on your ISP.
For example:
1. Host IP = 211.75.40.2*
2. Network mask = 255.255.255.240*
3. Gateway IP = 211.75.40.1*
z
Enable【4.Use static DNS】by choosing 【1.static DNS】
z
Assign【5.Static DNS】, such as: “1.Primary DNS = 168.95.1.1*”
(3) PPPoE
z
Pick【1.Mode】/【1.DHCP】
z
Go to【3.PPPoE settings】and enter your PPPoE authentication information, such as:
1. Login ID = MyPPPoEAccount*
2. Password = PPPoEDialupPassword*
z
Disable【4.Use static DNS】by choosing 【2.DHCP/PPPoE】
i. If you want to assign a different domain name server instead of using those obtained