Sony DSC-HX400V - Manual (Page 121)

1. MENU → (Setup) → [Upload Settings] → desired setting.
2. Set your Wi-Fi network or destination on the Eye-Fi card.
For details, refer to the manual supplied with the Eye-Fi card.
3. Insert the Eye-Fi card you have set up into the product, and shoot still images.
Images are transferred to your computer, etc., automatically via the Wi-Fi network.
Menu item details
On (default setting):
Enables the upload function.
Off:
Disables the upload function
Communication status screen display
: Standby. No images are to be sent.
: Upload standby.
: Connecting.
: Uploading.
: Error
Note
Eye-Fi cards are only sold in certain countries/regions.
For more information on Eye-Fi cards, please contact the manufacturer or vendor directly.
Eye-Fi cards can be used only in the countries/regions where they were purchased. Use
Eye-Fi cards in accordance with the law of the countries/regions where you purchased the
card.
Eye-Fi cards are equipped with a wireless LAN function. Do not insert an Eye-Fi card into
the product on an airplane. When an Eye-Fi card is inserted into the product, set [Upload
Settings] to [Off]. When the upload function is set to [Off], the
indicator will be
displayed on the product.
Power save mode will not function during uploading.
If
(error) is displayed, remove the memory card and reinsert it, or turn the product off
and then on again. If the indicator appears again, the Eye-Fi card may be damaged.
Wireless LAN communication may be influenced by other communication devices. If the
communication status is poor, move closer to the access point to be connected.
Third parties may know where you shot the image if you upload the image containing GPS
information. This is because [GPS On/Off] is set to [On]. Set [GPS On/Off] to [Off] before
shooting.
This product does not support Eye-Fi “Endless Memory Mode.” Before using an Eye-Fi card,
be sure that “Endless Memory Mode” is turned off.
111