Sony DSC-HX400V - Manual (Page 141)

To transfer two or more images, select MENU → (Wireless) → [Send to
Smartphone] to select images. After the connection enabled screen appears, use NFC
to connect the product and the smartphone.
About “NFC”
NFC is a technology that enables short-range wireless communication between various
devices, such as mobile phones or IC tags, etc. NFC makes data communication simpler with
just a touch on the designated touch-point.
NFC (Near Field Communication) is an international standard of short-range wireless
communication technology.
Note
You can select an image size to be sent to the smartphone from [Original], [2M], or [VGA].
To change the image size, refer to the following steps.
For Android smartphone
Start PlayMemories Mobile, and change the image size by [Settings] → [Copy Image Size].
For iPhone/iPad
Select PlayMemories Mobile in the setting menu, and change the image size by [Copy Image Size].
If the Image Index is displayed on the product, you cannot transfer images using the NFC
function.
If you cannot make a connection, perform the following:
Launch PlayMemories Mobile on your smartphone, and then move the smartphone slowly toward the
(N mark) of this product.
If the smartphone is in a case, remove it.
If the product is in a case, remove it.
Confirm that the NFC function is activated on the smartphone.
When [Airplane Mode] is set to [On], you cannot connect the product and the smartphone.
Set [Airplane Mode] to [Off].
You cannot send AVCHD format movies.
How to Use Using Wi-Fi functions Transferring images to a computer
Send to Computer
You can transfer images stored in the product to a computer connected to a wireless access
point or wireless broadband router and easily make backup copies using this operation. Before
starting this operation, install PlayMemories Home on your computer and register the access
131