Sony PCGA-UVC11A - Manual (Page 20)

20 GB
Disconnecting the camera
Notes
• If you disconnect the camera while the computer is on, follow the steps below. If you
do not follow these steps the computer may malfunction.
• When your computer is off, you do not need to perform step 1 below. However, if you
disconnect the USB cable while your computer is in power-saving mode, and then
connect it again, the camera may not be detected.
1
Close the software used by the camera.
2
Disconnect the USB cable, and then remove the camera.
Notes
• If you pull on the cable itself when disconnecting the USB cable, you may damage
the cable. Make sure that you hold onto the connector when disconnecting the
cable.
• When removing the camera from the mounting adapter, spread the arm plate with
your hand, and then remove the camera.