Sony DSC-P92 User Manual
Page 89
89
Tr
oub
lesh
oot
in
g
The image is too bright.
• You are shooting a spot lighted subject in a dark
location such as on a stage.
• The brightness of the LCD screen is too high.
p Adjust the exposure (page 46).
p Adjust the brightness of the LCD screen (page 103).
Vertical streaks appear
when you are shooting a
very bright subject.
• The smear phenomenon is occurring.
p This is not a malfunction.
When looking at the LCD
screen in a dark place,
some noise may show up
on the screen.
• The camera temporarily brightens the LCD
screen to allow you to check the image being
displayed while you are using the camera in a
dark place.
p This will have no effect on the image you shoot.
You cannot shoot images.
• No “Memory Stick” is inserted.
• The capacity of the “Memory Stick” is
insufficient.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
• You cannot shoot while the flash is charging.
• The mode selector is not set to
when you
want to shoot a still image.
• The mode selector is not set to
when you
want to shoot a movie.
p Insert a “Memory Stick” (page 19).
p Delete the images saved in the “Memory Stick,” or format it.
p Change the “Memory Stick.”
p Set it to the recording position (page 105).
—
p Set the mode selector to
p Set the mode selector to
The macro mode does not
function.
• When shooting still images,
(Camera) is set
to
or .
p Cancel the mode (page 54).
Cannot shoot images with
the flash.
• The mode selector is set to
or SET UP.
• The flash is set to
(No flash).
• When shooting still images,
(Camera) is set
to .
• [Moving Image] is not set to [Clip Motion] in the
SET UP settings.
p Set it to a setting other than
, or SET UP
(page 28).
p Set the flash to “Auto” (No indicator), (Forced flash), or
(Slow synchro) (page 28).
p Cancel the mode (page 54).
p Set it to [Clip Motion] (page 102).
The eyes of the subject
come out red.
—
p Set [Red Eye Reduction] to [On] (page 29).
The date and time are
recorded incorrectly.
• The date and time are not set correctly.
p Set the correct date and time (pages 17, 103).
Symptom
Cause
Solution