Sony MZ-B100 - Manual (Page 48)

48
-GB
The disc cannot
edit on other
component. • The component does not support LP2 stereo or LP4 stereo.
, Edit on other component that support LP2 stereo or LP4 stereo.
Momentary noise
is heard. • Due to the special digital audio compression technology used in
LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in normal stereo or LP2 stereo mode.
The group
function (group
mode/group skip
mode) does not
operate. • While using a disc that has no group information, an attempt was
made to turn the group mode on (“No Group” appears).
, Use a disc with a group information.
The display
window is not
normal. • The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power source,
reconnect it, and then press any of the operating buttons.
The recorder
skips tracks when
you press ./
>. • The group skip mode is on.
, The group skip mode automatically turns off if no operation is
made for 5 seconds.
Symptom Cause/Solution