Sony MZ-DH10P - Manual (Page 14)

Preparing a Power
Source
Charge the rechargeable battery before using
it for the first time or when it is depleted. To
maintain the original battery capacity longer,
charge the battery only when it is completely
depleted.
Since the supplied USB cradle is for this
player only, you cannot charge other model
using this cradle.
Operations can be done on the player or the
remote while charging.
1
Slide and open the battery
compartment lid in the direction of
the arrow.
2
Insert the rechargeable battery.
Insert it starting with the  and 
terminal end and with the label side facing
front
 / 
terminal
3
Close the lid.
4
Connect the AC power adaptor to
the USB cradle and the AC power
adaptor to a wall outlet.
to a wall outlet
AC power adaptor
(supplied)
to DC IN
6V jack
back of the USB cradle
5
Place the player on the USB cradle
and push it in firmly.
6
Make sure that the CHG lamp on the
player lights up.
Charging of the battery starts.
CHG
lamp
14
MZ-DH10P.GB.2-590-278-11(2)