Sony VRD-VC20 - Manual (Page 16)

16
Hint
The drive switches the input automatically when detecting the video signal (Auto Source
Selection function
page 30).
Once you play back the video on the connected video camera (video signal is output), for
example, to search a scene to be recorded, the drive switches the input to “DV” automatically.
Make sure “DV” is displayed on the display window before recording, or display “DV” by
pressing INPUT SELECT manually.
4
Press the eject button, and insert a disc.
A new blank disc is formatted automatically. Wait until [Format] on the display
window changes to [Ready].
5
Press REC to start recording.
The drive starts recording at the same time the video camera starts playback.
[Recording] appears on the display window, and the REC button lights up
during recording.
[SIG] on the display window indicates that the drive is receiving signals from
the digital video camera.
Hint
Recording stops automatically when playback of the digital video camera ends.
6
Press STOP to stop recording.
[STOP] appears on the display window.
The digital video camera stops playback automatically.
Eject button
Recording side
REC