Sony VRD-VC20 - Manual (Page 30)

30
4
Press REC to start recording.
Recording will stop after the preset time.
Notes
• The stop timer setting is cancelled when the operation is completed, or the power is turned
off.
• If you press TIME repeatedly during the stop timer recording, recorded time, remaining
recording time, and remaining disc time are displayed in turn.
• If you press PAUSE, recording pauses. To resume recording, press it again.
The drive selects the type of input signal (DV, S-VIDEO, or VIDEO)
automatically by detecting the video signal from the connected device (Auto
Source Selection function). Once you play back the video on the connected
video device (video signal is output), for example, to search a scene to be
recorded, the drive automatically selects the input connector connected to the
video device.
However, this function may not work correctly when plural jacks are
connected at the same time, or depending on the connected device. If this
happens, select the input signal manually by pressing INPUT SELECT
(
page 9).
Auto source selection