AEG BP5003021 - Manual (Page 15)

2. Activate an oven function or setting.
3. Press and hold and at the same time for 2 seconds.
4. An acoustic signal sounds. Loc comes on/goes out in the display (when you activate or
deactivate the Control Lock).
If the oven has Pyro Cleaning function, the door is locked.
You can deactivate the appliance when the Control lock is on. When you deactivate the
appliance, the control lock deactivates.
Loc comes on in the display when you turn a knob or press a button.
Residual heat indicator
Display shows the residual heat indicator after end of every cooking sessions when the
temperature inside oven cavity is more then 40°C. Use Temperature knob to show the oven
temperature on the display.
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to oper-
ate until the appliance cools down.
Switching the display off
You can switch off the display only if the appliance is off.
To switch the display off or on press and hold and at the same time until the display
switches off or on.
Automatic switch-off
For safety reasons the appliance deactivates itself after some time:
• if an oven function is running.
• if you do not change the oven temperature.
Oven temperature Switch-off time
30 °C -120 °C 12.5 h.
120 °C - 200 °C 8.5 h.
200 °C -250 °C 5.5 h.
250 °C -maximum °C 3.0 h.
After an automatic switch-off, press a any button to operate the appliance again.
The Automatic switch-off works with all oven functions, except Light, Low temperature
cooking, Core Temperature Sensor, Duration, End, Time delay.
Additional functions 15