Sony VPL-VW100 - Manual (Page 11)

7
VPL-VW100
3-2. PJ Talk
The remote control service is provided that can control the projector from remote location via network.
3-2-1. Function
This responds to the control command and requests for acquiring the status and information supplied
from clients.
Control request
Enables the input to be selected and picture control to be adjusted.
SIRCS request
Enables remote control by sending the SIRCS code.
Status request
Enables equipment status information such as power status, error information and power-on time to be
acquired.
Information request
Enables equipment information such as equipment name, serial number and installation information to be
acquired.
Protocol
Item Description
Protocol name SDCP (Simple Display Control Protocol)
Transport TCP
Port number 53484 (Factory-shipments value)
TCP connection timeout 30 seconds (Factory-shipments value)
3-2-2. Setup Items
The items that can be set for the PJ Talk service are described below.
Setup item Description
Port No. Port number
Timeout TCP connection timeout time
Host Address IP address of connectable PC