Sony VPL-VW100 - Manual (Page 15)

11
VPL-VW100
SET (00h) Item No. n Set Data (n byte)
Request Item No.
Data
Length
Data
OK (01h) Item No. 0
3-4-1-4. SET Request
The SET request is used to set a new value in the specified item. Details of the request and the response
are described below.
Request
Response
3-4-1-5. GET Request
The GET request is used to acquire the value of the specified item. Details of the request and the response
are described below.
Request
Response
3-4-1-6. ERROR Response
When an error occurs in the contents of a request or in the result of execution, NG is returned as the
response.
OK (01h) Item No. n Get Data (n byte)
GET (01h) Item No. 0
Request Item No.
Data
Length
NG (00h) Item No. 2 Error Code (16)