Sony KLV-23M1 - Manual (Page 20)

20
Overview of the TV Controls and Connectors
Front Panel Controls and Connectors
To open the control door
To open the control door of your TV, push the door just under
the “
V OPEN” mark.
Item/Jack Description
1 (IR) Infrared Receiver
2 (Timer) LED
3 1 (Power) and
1 (Power on/Stand by)
LED
4 i Headphones jack
5 TV/VIDEO
6 – VOLUME +
7 – CHANNEL +
Receives IR signals from the remote control.
When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit. For details, see
page 72.
Press 1 (Power) to turn on and off the TV. The LED lights up green when the TV is turned on. When in
standby mode, the LED lights up in red. If the LED blinks continuously, this may indicate the TV needs
servicing (see page 73).
Connects to your headphones.
If your headphones do not match the jack, use a suitable plug adaptor (not supplied).
Press repeatedly to cycle through the video equipment connected to the TV’s video inputs.
Press to adjust the volume.
Press to scan through channels. To scan quickly through channels, press and hold down either CHANNEL
– or +.
OPEN
TV / VIDEO VOLUME CHANNEL
2
1
3
4 5 6 7