Connecting and setting the tv, Basic connections (connecting cable or an antenna), Connector types – Sony KLV-23M1 User Manual

Page 24: Connecting directly to cable or an antenna, Cable box connections, Basic connections (connecting cable or, An antenna), Connector types connecting directly to cable or an, Antenna

Advertising
background image

24

Connecting directly to cable or an
antenna

VHF only or VHF/UHF or cable

Also, set “Cable” to “Off” in the

(Channel)

menu (see page 37).

Notes

• It is strongly recommended to connect the antenna using a 75-

ohm coaxial cable to get optimum picture quality. A 300-ohm
twin lead cable can be easily affected by radio noise and the
like, resulting in signal deterioration. If you use a 300-ohm
twin lead cable, keep it away as far as possible from the TV.

• Do not detach the ferrite core from the supplied 75-ohm

coaxial cable.

• The ferrite core is attached to one end of (not the center of) the

supplied 75-ohm coaxial cable. When connecting the cable to
the TV, insert the end with the ferrite core into the VHF/UHF
jack.

Cable box connections

Use this hookup if:

• You subscribe to a cable TV system that uses

scrambled or encoded signals requiring a cable
box to view all channels, and

• You do not intend to hook up any other audio or

video equipment to your TV.

1

Connect the coaxial connector from your cable
service to the cable box’s IN jack.

2

Using the supplied 75-ohm coaxial cable,
connect the cable box’s OUT jack to the TV’s
VHF/UHF jack.

Tips

• The supplied remote control can be programmed to operate

your cable box (see “Programming the Remote Control” on
page 16).

• To change channels using the cable box, set your TV to

channel 3 or 4 depending on the cable box channel output.

• If you will be controlling all channel selection through your

cable box, consider using the Channel Fix feature to set your
TV to channel 3 or 4 (see page 38).

75-ohm coaxial
cable (supplied)

Rear of TV

VHF/UHF jack

Basic Connections
(Connecting Cable or an
Antenna)

Connector types

You may find it necessary to use some of the
following connector types during set up.

Supplied 75-ohm coaxial cable

Screw-on type

S VIDEO cable

High quality video cable for enhanced picture quality

AUDIO/VIDEO cable

VIDEO - Yellow
AUDIO (Left) - White
AUDIO (Right) - Red

Some DVD players are equipped with the following
three video connectors:

Y - Green
P

B

(C

B

, C

b

or B-Y) - Blue

P

R

(C

R

, C

r

or R-Y) - Red

HDMI cable

High definition multimedia interface cable

Screw into connector

Align guides and push into
connector

Push into connector

Connecting and
Setting the TV

Push into connector

Align guides and push into
connector

Rear of TV

VHF/UHF jack

IN
jack

OUT
jack

Cable

Cable box

75-ohm coaxial
cable (supplied)

Advertising