White balance [108, White balance – Sony ILCE-7S User Manual

Page 109

Advertising
background image

Widens the range (gradation) so that you can record from bright parts to dark parts with

correct brightness (HDR: High Dynamic Range). One image with proper exposure and one

overlaid image are recorded.

1. MENU

(Camera Settings

) → [DRO/Auto HDR] → [Auto HDR].

2. Select the desired setting using the left/right side of the control wheel.

Menu item details

Auto HDR: Exposure Diff. Auto (default setting):

Corrects the exposure difference automatically.

Auto HDR: Exposure Diff. 1.0EV

― Auto HDR: Exposure Diff. 6.0EV:

Sets the exposure difference, based on the contrast of the subject. Select the optimal level

between 1.0 EV (weak) and 6.0 EV (strong).

For example, if you set the exposure value to 2.0 EV, three images will be composed with
the following exposure levels; −1.0 EV, optimal exposure and +1.0 EV.

Note

[Auto HDR] is not available for RAW images.

When the shooting mode is set to [Intelligent Auto], [Superior Auto], [Sweep Panorama] or

[Scene Selection], you cannot select [Auto HDR].

When [Multi Frame NR] is selected, you cannot select [Auto HDR].

When using [Picture Effect], you cannot select [Auto HDR].

When [Picture Profile] is set to something other than [Off], you cannot set [Auto HDR].

You cannot start the next shot until the capture process is completed after you shoot.

You may not obtain the desired effect depending on the luminance difference of a subject

and the shooting conditions.

When the flash is used, this function has little effect.

When the contrast of the scene is low or when product shake or subject blur occurs, you

may not obtain good HDR images. If the product has detected a problem,

is

displayed on the recorded image to inform you of this situation. Shoot again as necessary,

paying attention to the contrast or blur.

[108] How to Use

Using shooting functions

Adjusting color tones

White Balance

Adjusts the color tones according to the ambient light conditions. Use this feature when the

color tones of the image did not come out as you expected, or when you want to change the

Advertising