Sony VPL-VW95ES - Manual (Page 22)

22
Tip
• When “Lens Control” is set to “Off” on the Installation
menu, you cannot adjust the picture
position ( 1 page 63).
When “Test Pattern” is set to “Off” on the Function menu, the test pattern is not displayed
( 1 page 62).
• The test signal is displayed for 1 minute.
Press the button to clear the test signal display before that.
4
Adjust the picture size.
Press the LENS ADJUSTMENT
(ZOOM) button to display the Lens
Zoom adjustment window (test
pattern). Then adjust the size of the
picture by pressing the
M/m/</,
buttons.
To make the picture larger, press
M / , .
To make the picture smaller, press m / < .
5
Adjust the picture position.
Press the LENS ADJUSTMENT
(SHIFT) button to display the Lens
Shift adjustment window (test pattern).
Then adjust to the proper position of
the picture by pressing the
M/m/</,
buttons.