Sony VPL-VW95ES - Manual (Page 80)

80
3
Connect the USB cable to the
USB connector of the supplied
USB charging AC power
adaptor.
4
Connect the AC power cord for
USB charging AC power adaptor
to the supplied USB charging
AC power adaptor.
5
Plug the AC power cord for USB
charging AC power adaptor into
an AC outlet.
Charging starts. The LED indicator on
the 3D glasses lights up in orange while
the glasses are being charged.
Precautions about USB charging
AC power adaptor
Installation
Do not place the USB charging AC power
adaptor in a location where it is:
• Subject to extreme high temperature (E.g.,
in a car with its windows closed)
• Subject to direct sunlight or near a heat
source
• Subject to mechanical vibration or shock
Operation
• To prevent damage, be careful not to drop
or otherwise cause a mechanical shock to
the unit.
• After using, disconnect the unit from the
AC outlet and the equipment.
• Disconnect the unit from the AC outlet by
pulling on the plug. Do not pull on the
cord.
• To avoid short-circuiting, do not allow the
terminals of the USB charging AC power
adaptor or connector to touch any metal
object.
Cleaning
• Clean the unit with a soft, dry cloth. If the
unit is very dirty, wipe it off with a soft
cloth lightly moistened with a mild
detergent solution, and then wipe with a
soft dry cloth.
• Do not use any type of solvent such as
alcohol, thinner, or benzine as it may
damage the finish of the cabinet.
• If you use any chemical cleaner, observe
the instructions provided with the product.
• If the cabinet of the unit is splashed with
any type of solvent such as insecticide, or
remains in contact for a long time with
rubber or vinyl, the finish of the cabinet
may be damaged.
Supplied USB charging AC power adaptor
AC power cord for USB
charging AC power adaptor