Sony SRS-BTS50 - Manual (Page 53)

device, select “
SONY:SRS-BTS50.”
If passkey input is required on the display of a BLUETOOTH device, input
“
0000.”
A Passkey may be called a “Passcode,” a “PIN code,” a “PIN number,” or a
“Password.”
4. Make the BLUETOOTH connection from the BLUETOOTH device.
When the system is connected with the BLUETOOTH device, the
(BLUETOOTH) indicator (blue) stops flashing and lights up.
Tip
To delete all pairing information, see “ What can I do to solve a problem? ”
Notes
For details, refer to the operating instructions supplied with the BLUETOOTH
device.
When pairing with a BLUETOOTH device that cannot display a list of detected
devices or that has no display, you may pair the device by setting both the
system and the BLUETOOTH device to pairing mode. At this time, if passkey is
set besides “0000” on the BLUETOOTH device, pairing cannot be done with the
system.
Once BLUETOOTH devices are paired, there is no need for pairing again,
except in the following cases:
Pairing information has been deleted after repair, etc.
The system has been paired with 9 or more devices. The system can be
paired with up to 8 devices; if a new device is paired after the first 8 devices
have been paired, the device whose latest connection time is the oldest among
the 8 paired devices is replaced by the new one.
When recognition of the system by the device to be connected has been
deleted.
When the system is initialized, pairing information is deleted.
Copyright 2013 Sony Corporation
53