Sony SRS-BTS50 - Manual (Page 56)

4. Perform the pairing procedure on the BLUETOOTH device to detect the
system.
When the list of detected devices appears on the display of the BLUETOOTH
device, select “
SONY:SRS-BTS50.”
If passkey input is required on the display of a BLUETOOTH device, input
“
0000.”
A Passkey may be called a “Passcode,” a “PIN code,” a “PIN number,” or a
“Password.”
5. Make the BLUETOOTH connection from the BLUETOOTH device.
When the system is connected with the BLUETOOTH device, the
(BLUETOOTH) indicator (blue) stops flashing and lights up.
Tips
To pair with other BLUETOOTH devices, repeat steps 3 to 5 for each device.
To delete all pairing information, see “ What can I do to solve a problem? ”
Notes
For details, refer to the operating instructions supplied with the BLUETOOTH
device.
When pairing with a BLUETOOTH device that cannot display a list of detected
devices or that has no display, you may pair the device by setting both the
system and the BLUETOOTH device to pairing mode. At this time, if passkey is
set besides “0000” on the BLUETOOTH device, pairing cannot be done with the
system.
56