AMX DAS-SIRIUS - Manual (Page 14)

Mi Series – SIRIUS Setup screen
10 DAS-SIRIUS Sirius Satellite Radio Tuner Module
SIRIUS Setup - CAT
Selecting CAT (Category) displays the following screen (FIG. 19), where the Category can be selected by
choosing PREV/NEXT. The default = 1 All.
SIRIUS Setup - CH
Selecting CH (Channel) will display the following screen (FIG. 20), where a Channel can be selected by
choosing PREV/NEXT.
Presets can be set via this screen if the installer chooses. There are 10 available preset positions. Presets
can also be set at the keypad.
SIRIUS Setup - ID
Selecting ID displays the SIRIUS ID (FIG. 21).
SIRIUS Setup - Status
Selecting STATUS will display the following SIRIUS status screen (FIG. 22):
FIG. 19 SIRIUS Category screen
Category will be updated to the LCD keypads after exiting the Controller setup
screens.
FIG. 20 SIRIUS Channel screen
Channel will be updated to the LCD keypads after exiting the Controller setup
screens
FIG. 21 SIRIUS ID screen
FIG. 22 SIRIUS Status screen
Exit SIRIUS Setup
Terrestrial Signal Level
Activation Status
Satellite Signal Level
Antenna Status