Sony DCR-DVD101 - Manual (Page 100)

100
9
Double-click the scene to view from the
thumbnails.
The selected scene is temporarily copied
to your computer and is displayed in
the preview window.
To return to the thumbnails list, click
below right of the window.
To save the scene on your
computer
1 Click the thumbnail of the scene to save.
2 Click .
The selected scene is saved on your
computer.
To view the album
1 Click .
2 Double-click the scene to view from the
thumbnails.
The selected scene is displayed. When
you have selected a movie, click
and
start playback.
To return to the thumbnails list, click
at the top right of the window.
Viewing scenes recorded on your computer
Notes
•If you connect the USB cable before USB
driver installation is complete, the USB
driver will not be properly registered. Install
the USB driver again following the steps in
“If you cannot install the USB driver” (page
98).
•It may take some time to save the scene to the
computer depending on the recording mode
(page 32) and the length of the movie.
•You cannot remove the disc from your
camcorder during displaying the thumbnails
on your computer display.
•When anything goes wrong with the
operation, close all the software and restart
the computer.
Tips
•An album is a unit to register and to manage
the saved movies and still images saved from
your camcorder to your computer.
•Still images converted to a movie are not
displayed.