Sony DCR-DVD101 - Manual (Page 20)

20
Adjusting the angle and the brightness of the LCD screen
Adjust the brightness and the angle of the LCD screen properly in your sight.
1
Open the LCD screen.
2
Adjust the direction of the LCD screen to the desired position.
When you adjust the angle of the LCD screen, make sure if the LCD screen is
opened up to a full 90 degrees.
You can turn the LCD screen over and then fold it back to the camcorder body
with the LCD screen facing out as shown below.
To adjust the brightness of the LCD display
1
Turn the power on by pressing the POWER button for a few seconds.
2
Press SETUP.
The SETUP display appears.
3
Use the multi-selector to select (LCD/VF SET).
Refer to page 23 to see how to use the multi-selector.
Step 3 Adjusting the LCD screen and the viewfinder
[ SETUP ] : END
PROGRAM AE
P EFFECT
D EFFECT
AUTO SHTR
WHT BAL
MANUAL SET
[ SETUP ] : END
LCD BRIGHT
LCD B. L.
LCD COLOR
RETURN
VF B. L.
LCD / VF SET
1
2
LCD BACKLIGHT
button
90°
180°
90°