Sony DCR-DVD101 - Manual (Page 35)

35
Shooting movies/still images
VIDEO
FINE 0 -R
Perform “Getting Started” from step 1 to 5 beforehand (page 15).
The following operation is common with VIDEO mode and VR mode.
You can record still images and movies on the same disc.
1
Remove the lens cap by pressing both knobs on the sides of the cap.
2
Install the battery pack or connect the AC adaptor (page 15).
3
Open the LCD screen.
The image is not displayed in the viewfinder when the LCD screen opens.
4
Set the mode dial to (Still).
5
Turn the power on by pressing the POWER button for a few seconds.
6
Insert a disc (page 26).
This sets your camcorder to standby.
Shooting still images
1
6
7 8
3
4
2
5