Sony PEGA-MSB1 - Manual (Page 13)

13
Continued on next page
Installing the Software
When you try to perform Bluetooth communications for the first time
after inserting this Bluetooth Module in your CLIÉ handheld, you
need to install the Bluetooth Preferences utility in your CLIÉ
handheld. You can install the utility from the supplied CD-ROM.
Note
Before installation, it is necessary to prepare to perform a HotSync operation.
Connect the CLIÉ handheld to a Windows computer, using a cradle, etc. For
details on how to connect the CLIÉ handheld to the computer, see the Operating
Instructions of your CLIÉ handheld.
1
Perform a soft reset on your CLIÉ handheld.
For details on how to perform a soft reset, see the Operating
Instructions of your CLIÉ handheld.
2
Insert the supplied CD-ROM in the CD-ROM drive of
your Windows computer.
The installer starts and the initial screen appears.
Tip
If the installer does not start automatically, double-click [setup] (setup.exe).
You can find it in the CD-ROM.
3
Proceed with the installation, following the installer's
instructions.
On the user name selection screen, select a user's name.
Notes
• If you want to use more than one CLIÉ handheld, you need to install this
utility in each CLIÉ handheld.
• The Bluetooth Preferences utility does not support the high resolution
mode. It is recommendable to enable the High Resolution Assist function
on the Preferences settings screen of your CLIÉ handheld.