Sony KDE-55XBR950 - Manual (Page 30)

28
Setup
Basic Connections: Connecting a Cable or Antenna
The way in which you will connect your TV varies, depending on how your
home receives a signal (cable, cable box, antenna) and whether or not you
plan to connect a VCR.
If you are connecting a VCR
s See the connections described on pages 33 and 35.
Cable or Antenna For best results, use this connection if you are connecting a cable or an
antenna and you:
s Do not need a cable box to unscramble channels. (If you have a cable
box, see page 30.)
s Do not intend to connect a VCR. (If you have a VCR, see pages 33 and
35.)
For antenna connection, use the supplied antenna cable.
Note on Using This Connection
If You Are Connecting See Page
Cable or Antenna
s No cable box or VCR
28
Cable Box and Cable
s Cable box unscrambles only some channels
(usually premium channels)
s No VCR
29
Cable Box
s Cable box unscrambles all channels
s No VCR
30
Cable Type Connect As Shown
VHF Only or
combined
VHF/UHF
Cable
When using an indoor antenna, such as rabbit-ear or dipole-
antenna, keep the antenna away from the display unit. If not,
noise may appear on the screen.
VHF/UHF
Antenna
cable
(supplied)
CABLE 75-ohm
coaxial
cable
To Do This ... Do This ...
Switch the TV’s input between
the cable and antenna Press ANT to switch back and forth between the TV’s VHF/UHF and CABLE
inputs.