Sony CDP-CE500 - Manual (Page 15)

P
lay
b
a
ck
15 US
CD SYNC
1)
REC1
1)
In Program Play mode, the folder name is
“PGM_xxx,” and the file name depends on the
music source (CD-DA disc or MP3 disc).
2)
Up to 32 characters of the name are assigned.
3)
Folder numbers are assigned serially thereafter up to
the maximum 999.
4)
File numbers are assigned serially thereafter.
5)
A new file is created in the “REC1” folder each time
REC1 is performed.
Note
• When transferring music from a CD, the tracks are
transferred as 128 kbps MP3 files. When transferring
music from an MP3 disc, MP3 files are transferred
with the same bit rate as the original MP3 files.
• If you start transferring in Shuffle Play mode, Repeat
Play mode, or in Program Play mode (when no tracks
or MP3 files are programmed), the selected playback
mode is automatically canceled and the playback
mode switches to normal playback mode.
• While transferring music from an MP3 disc, no sound
is output and “HI-SPEED” appears.
• CD text information is not transferred in the created
MP3 files.
• If you cancel the transfer partway, an MP3 file is
created up to the point when the transfer was stopped.
• Transferring stops automatically if:
– the USB device runs out of space during the
transfer process.
– the number of audio files on the USB device
reaches the limit for the number that the player can
recognize.
• If a folder or file that you are trying to transfer already
exists on the USB device with the same name, a
sequential number is added after the name without
overwriting the original folder or file.
• This player cannot transfer music from an MP3 disc
when the number of audio files in a folder exceeds
999. The number may vary depending on the file and
folder structure. Do not save other types of files or
unnecessary folders on a disc that has audio files.
You can erase audio files or folders from the
USB device. Note that you cannot erase audio
files and folders in Shuffle Play mode or
Program Play mode.
1
Connect the USB device to the USB
port.
2
Press USB.
3
Press ./> or FOLDER +/–
repeatedly to select the audio file or
folder you want to erase.
4
Press USB MENU in stop mode.
5
Make sure that “ERASE” is selected,
and then press ENTER.
“TRACK ERASE” or “FOLDER ERASE”
appears in the display.
To cancel the erase operation, press x.
6
Press ENTER.
The selected audio file or folder is erased.
Note
• If the folder to be erased contains non-MP3/WMA/
AAC format files or sub folders, these are not erased.
Music source Folder name File name
MP3 Same as the music source
2)
CD-DA “CDDA001”
3)
“TRACK001”
4)
Music source Folder name File name
MP3 “REC1”
5)
Same as the
music source
2)
CD-DA “TRACK001”
4)
Erasing audio files or folders
from the USB device
Do not remove the USB device during erase
operations. Doing so may corrupt the data on
the USB device or damage the USB device
itself.