Sony CDP-CE500 - Manual (Page 24)

Sony Corporation Printed in Malaysia
(1)
Specifications
CD player section
Laser Semiconductor laser (
λ =
780 nm)
Emission duration:
continuous
Frequency response 2 Hz to 20 kHz ± 0.5 dB
Dynamic range More than 90 dB
Harmonic distortion Less than 0.006%
Laser Diode Properties Emission Duration:
Continuous
Laser Output: Less than
44.6
μW
* This output is the value measurement at a
distance of 200 mm from the objective lens
surface on the optical pick-up block with 7 mm
aperture.
USB section
Supported bit rate MP3 (MPEG 1 Audio
Layer 3): 32 kbps – 320
kbps, VBR
WMA: 48 kbps – 192 kbps
AAC: 48 kbps – 320 kbps
Sampling frequencies MP3 (MPEG 1 Audio
Layer 3): 32 kHz/
44.1 kHz/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
USB port Maximum current:
500 mA
Outputs
General
Power requirements 120 V AC, 60 Hz
Power consumption 16 W
Dimensions (approx.) 430 mm × 110 mm ×
400 mm
(w/h/d) (17 in × 4 3/8 in ×
15 3/4 in) incl. projecting
parts
Mass (approx.) 5.2 kg (11 lbs 1 oz)
Supplied accessories
Audio cord Red and white (1)
Remote commander RM-ASU100 (1)
Battery R6 (size-AA) (2)
Design and specifications are subject to change
without notice.
Jack type Maximum
output level
Load
impedance
ANALOG
OUT Phono
jacks 2 V (at 50
kilohms) Over 10
kilohms
DIGITAL
OUT
OPTICAL Optical
output
jack –18 dBm Wave
length:
660 nm
• Standby power consumption: 0.3 W
• Halogenated flame retardants are not used in the
certain printed wiring boards.