Sony RM-TP2 - Manual (Page 17)

17 GB
Basic Operations
CABLE
Key Function
POWER To turn the power on/off.
1–9, 0, To change the channel. For example, to
ENTER change to channel 5, press 0 and 5 (or,
press 5 and ENTER).
JUMP To toggle between the previous and
current channels.
CH +/– To select a channel.
SATELLITE
Key Function
POWER To turn the power on/off.
1–9, 0 To select the channel.
Pressing 0 selects channel 10.
-/-- Press before selecting channel 11 or
higher. (After pressing -/--, use the
numeric buttons to select the channel,
then press ENTER.)
Or, press to select channel 11 directly.
ENTER To enter the selection.
Or, press to select channel 12 directly.
JUMP To toggle between the previous and
current channels.
CH/PAGE +/– To select the channel or the menu page.
FAVORITE To display the Favorite Station Guides.
CATEGORY To display the Guide Category list.
GUIDE To display the SAT guide.
INDEX To bring up the Station Index
TV/SAT To switch the output of the SAT
receiver to the TV (When you connect
a TV cable or antenna to the amplifier/
receiver, the output switches between a
TV and SAT program).
DISPLAY To select information displayed on the
TV screen.
v/V/b/B To move the cursor.
+ To enter the setting.
MENU To call up the MENU display.
EXIT To exit the mode.
PROJECTOR
Key Function
POWER ON To turn the power on.
POWER To turn the power off.
OFF
INPUT To switch to the input from
SELECT VIDEO jacks.
VIDEO
INPUT To switch to the input from VIDEO IN
SELECT or S VIDEO IN jacks.
SELECT
INPUT To switch to the input from INPUT A
SELECT or INPUT B jacks.
A/B
MEMORY To store the adjusted data in memory.
MENU To call up the MENU display.
v/V/b/B To move the cursor.
ENTER To enter the setting.
ZOOM +/– To adjust the zoom of the picture.
SHIFT +/– To adjust the lens shift of the picture.
FOCUS +/– To adjust the focus of the picture.
BRIGHT +/– To adjust the brightness.
CONTRAST To adjust the contrast.
+/–
continued