General, Ot her i n fo – Sony KE-42XBR900 User Manual

Page 102

Advertising
background image

100

Ot

her

I

n

fo

General

Problem

Possible Remedies

How to reset TV to
factory settings

s

Turn off the main power of the TV set. While holding down

RESET

on the

remote control, turn on the main power of the TV set. Turn on the TV. While
holding down

RESET

on the remote control, press

POWER

on the media

receiver unit. (The TV will turn itself off, then back on again.) Release

RESET

.

How to restore Video settings
to factory settings

s

Press

RESET

on the remote control while in the Video Menu (see page 78).

How to restore Audio settings
to factory settings

s

Press

RESET

on the remote control while in the Audio Menu (see page 80).

Cannot cycle through the other
video equipment connected to
the TV

s

Be sure the

Video Label

option is not set to

Skip

(see page 91).

Cannot operate Menu

s

If a menu option appears in gray, this indicates that the menu option is not
available.

Lost password

s

In the password screen (see page 86), enter the following master password:

4357

.

The master password clears your previous password; it cannot be used to
temporarily unblock channels.

LED on the display unit is lit

s

The POWER ON/STAND BY LED (see page 16) lights up when the TV is turned
on. If the LED blinks continuously, this may indicate the TV needs a service.

s

The TIMER LED (see page 16) indicates that the timer is set. When the timer is
set, this LED will remain lit even when the TV is turned off.

Advertising
This manual is related to the following products: