Sony KE-42XBR900 - Manual (Page 46)

44
Setup
Digital Satelite
Receiver with
DVI-HDTV connector To connect a digital Satelite Receiver with DVI-HDTV connector
1
Use a DVI-D single link cable to connect the Digital Satelite Receiver’s
DVI-HDTV connector to the TV’s DVI-HDTV connector.
The DVI-HDTV VIDEO connector does not provide audio, so
audio cables must be connected to provide sound.
2 Use an audio cable to connect the Digital Satelite Receiver’s audio
output jacks to the TV’s DVI-HDTV AUDIO jacks.
Notes on Using This Connection
Do not leave a still image or display indication, such as the
Electric Program Guide, displayed on the screen.
To Do This ... Do This ...
Watch the digital satelite receiver Press TV/VIDEO repeatedly to select the digital satelite receiver input (VIDEO 6 in
the illustration).
Label video inputs to easily
identify equipment connected to
the TV See the instructions for setting up Video Labels on page 91.
AUDIO
OUT
SUBWOOFER
OUT
1
VIDEO IN
R–AUDIO–L
R–AUDIO–L
VIDEO S VIDEO
3
VHF/UHF AUX
TO
CONVERTER
(VAR/FIX) (VAR)
6
DISPLAY SIGNAL OUT
DVI–HDTV IN
WHITE
DVI–HDTV
BLACK
R–AUDIO–L
VIDEO OUT
(480i)
VIDEO OUT
(1080i/720p/480p)
AUTHORIZED
SERVICES ONLY
RGB OUT
TYPE
1
L1 L2
Y
P B
P R R1
AUDIO OUT
S. VIDEO OPTICAL
OPTICAL
AUDIO
OUT
R2
2
(1080i/720p/480p) (1080i/720p/480p)
DVI-HDTV OUT
Rear of Media receiver unit
Audio cable
Digital Satelite Receiver
DVI-D single link cable