Setting up the channel list, Using auto setup – Sony KE-42XBR900 User Manual
Page 51
49
Setup
Setting Up the Channel List
After you finish connecting your TV, you need to run Auto Setup to set up
your channels. The Auto Setup screen appears when you turn on your TV for
the first time after hooking it up. If you do not want to set up the channels at
this time, you can do it later by selecting the Auto Program option in the
Channel Menu (see page 84).
The Auto Setup feature does not apply for installations that use
a cable box for all channel selection.
Using Auto Setup
1
Press
POWER
to turn on the TV.
2
Press
FUNCTION
on the remote control repeatedly until the
TV
indicator
lights up.
3
To continue running Auto Setup, press
CH+
. To exit Auto Setup, press
CH–
.
Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To reset the TV to factory settings
1
Press
POWER
to turn on the TV.
2
Hold down
RESET
on the remote control.
3
Press
POWER
on the Media receiver unit. (The TV will turn itself off,
then back on.)
4
Release
RESET
.