Sony DVP-NS999ES - Manual (Page 19)

19
S
imp
le
S
ta
rt
Gu
id
e
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cords in the order (1~3) shown below.
Be sure to connect the power cord last.
To change the aspect ratio for the
connected TV
Depending on the disc and the TV type
(standard 4:3 screen TV or wide screen TV),
the image may not fit the TV screen.
If this happens, change the aspect ratio
(page 77).
When connecting to a TV that accepts
progressive (480p) format signals
You need to use the COMPONENT VIDEO
OUT jacks to view progressive signals. Hook
up your TV using pattern C on page 21, and
then run Quick Setup on page 31.
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
VIDEO OUT 1/2 jack on the player to the TV’s
video input jack, and connect the AUDIO OUT L/R
1/2 jacks to the TV’s audio input jack.
SELECTABLE
INTERLACE
PROGRESSIVE
SCAN SELECT
COMPONENT VIDEO OUT
P R P B Y
5.1CH OUTPUT
FRONT REAR CENTER
WOOFER
L
R
1 2
COMMAND MODE
3
S VIDEO
OUT
2
1
VIDEO
OUT
2
1
AUDIO OUT
1 2 L
R
S-LINK
CONTROL S
IN
DIGITAL OUT
PCM/ DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
AUDIO OUT
1 2
L
R
VIDEO
OUT
2
1
VIDEO
L
AUDIO
R
INPUT
to AUDIO OUT
L/R 1 or 2
to audio input
1 Audio/video
cord (supplied)
2
Power source
to video input
to VIDEO
OUT 1 or 2
CD/DVD Player
TV
3 Power source
l : Signal flow
(white)
(red)
(yellow)