Sony DVP-NS999ES - Manual (Page 35)

35
Pl
ay
in
g Di
sc
s
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Press [/1.
The player turns on and the power
indicator lights up in green.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4
Press A on the player, and place a
disc on the disc tray.
5
Press H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 39. For VIDEO CDs,
see page 42.
To enjoy the clarity of Super Audio CD/CD
sound more
You can minimize the effect of the video
output by switching it off.
Toggle the scroll key up or down to display
“VIDEO OFF” in the LCD screen. Then point
the remote to the player and press down on
the scroll key once so that
appears in the
LCD screen.
When no video signal is output from the
player, the VIDEO OFF indicator lights up on
the player.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set “AUTO
POWER OFF” in “CUSTOM SETUP” to “ON”
(page 79).
Note
Super Audio CD audio signals are not output from
the digital jack.
[ / 1 H
Power
indicator
A
[ / 1 Z
H
VIDEO OFF
indicator
Scroll key
./>
With the playback side facing down
, continued