Sony PCG-NV170 - Manual (Page 67)

To connect to a parallel port printer
1. Locate the Printer port on the rear panel of the computer.
2. Plug one end of the printer cable (not supplied) into this port, and plug the opposite end of the cable into the
parallel port on your printer.
3. Make sure your computer's printer settings are properly set. See Displaying the Sony Notebook Setup Screen for
more information.
To use a printer, you may need to install the driver software that came with your printer.
Connecting a Parallel Port Printer
See the manual that came with your printer for more information on its installation and use.
If your printer stops functioning after resuming from a power saving mode, see Troubleshooting the Printer for more
information.
Page 67