Sony PFM-500A2WU - Manual (Page 27)

27
(EN)
Restoring the Original Picture
Size and Position
1
In the PIC SIZE menu, press >/. to move the
cursor (z) to “RESET” and press ENT.
The following menu appears on the monitor
screen.
2
Press >/..
“NO” changes to “YES.”
3
Press ENT.
The original picture size and position are restored.
To cancel the reset function, press the MENU button
before pressing the ENT button.
4
Press >/. to move the cursor (z) to “V SHIFT”
and press ENT.
The following menu appears on the monitor
screen.
5
Press >/. to shift the picture.
>: to shift the picture upward
.: to shift the picture downward
The vertical picture position is indicated on the
monitor screen from MIN(–50) to MAX(+50). The
factory value is 00.
6
Press ENT.
The menu returns to the PIC SIZE menu.
Zooming Up the Picture
You can also operate with the ZOOM button on the
Remote Commander.
1
In the PIC SIZE menu, press >/. to move the
cursor (z) to “ZOOM” and press ENT.
The following menu appears on the monitor
screen.
2
Press >/. to set zoom.
Each time you press >, the picture is magnified by
two, three, and four times respectively.
To zoom down, press
..
3
Press ENT.
The menu returns to the PIC SIZE menu.
V S H I F T : 0 0
R E S E T : N O
S E L E C T C A N C E L ENTER MENU
R E S E T : Y E S
S E L E C T C A N C E L ENTER MENU
Z O O M : x 1