ATEN CS-1762 - Manual (Page 33)

Chapter 4. Hotkey Operation
25
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 22).
2. Press and release [F5].
Keyboard Language
To change the keyboard language, do the following:
1. Invoke HSM (see page 22).
2. Press [F6] [nn] [Enter].
Note: nn is a two-digit number that represents the keyboard language code
(US English: 33; French: 08; Japanese: 15).
Hotkey Buzzer Control
The Buzzer can be enabled or disabled. The default setting is enabled. To
disable the Buzzer, do the following:
1. Invoke HSM (see page 22 ).
2. Press and release [B].
This procedure is a toggle. Repeat to enable.
Port Switching Keys
The Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]) can be
enabled or disabled. The default setting is enabled. To disable, do the
following:
1. Invoke HSM (see page 22).
2. Press [X] [Enter].
This procedure is a toggle. Repeat to enable.