Sony PEG-NZ90 - Manual (Page 44)

44
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I cannot connect to the Internet
I cannot connect to the Internet
B Wait for a while and retry.
I cannot connect to the Internet using a Wireless LAN card
B Check that the Wireless LAN card is recognized properly by your CLIÉ
handheld.
B Check that the correct settings are made under Network Preferences on
your CLIÉ handheld.
B Check that the correct network settings are made for the target device
(access point).
b For details, refer to the manual of each network card or target device.
The message “Modem cannot be found” is displayed
B Check that the connection between your CLIÉ handheld and network card
is proper.
The message “Incorrect setting” or “Certification is
invalid” is displayed
B Check that the settings of Network in the Preferences screen are proper.
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):
Changing the Network preferences” in the “Handbook.”
I cannot connect to the Internet after restoring data using
the “Memory Stick Backup” application
B Select Network in the Preference screen and reselect Service. (You do
not need to change the Network settings).
After selecting the same service, tap the Connect button to connect to the
Internet.