Sony PCM-D50 - Manual (Page 23)

23
Recor
ding
Recording analog sound
This section explains how to record analog
sound signals from the line output of an
external device or by using the built-in or
external microphones.
Recording using the built-in microphones
This sub-section explains how to record
sound sources in the built-in memory with
the built-in microphones.
To change sampling frequency, quantifying
bit number, or the memory drive for a
recording, go to the menu display (page 40).
The default sampling frequency and
quantifying bit number are “44.10 kHz
16 bit.”
1
Position the recorder and the built-in
microphones referring to “Preparation
before recording” (page 21).
2
Set the INPUT switch to the “ ”
(microphones) position.
3
Press the /MENU button.
The screen used to select a folder is
displayed.
Currently selected folder
Continued on the next page
 PAUSE button/
indicator
REC LEVEL dial
Volume dial
INPUT switch
/ MENU button
 REC button/
indicator
 PLAY/ENTER
button
 STOP button
 FR/  button
 FF/  button

jack
LINE IN (OPT)
jack