Operations after recording (continued) – Sony PCM-D50 User Manual

Page 32

Advertising
background image

PCM-D50. US. 3-277-770-11(2)

32

Operations after Recording (continued)

To change the memory drive

The recorder supports the use of “Memory
Stick” in addition to the built-in memory.
You can switch the memory as follows.
When you insert a “Memory Stick,” make
sure that the recorder is not recording or
playing a track. Make sure that it is
stopped.

1 While the recorder is stopped, press and

hold the

/MENU button until the menu

is displayed.

2

Press the

FF/

 and

FR/

 buttons

to select “MEMORY,” and press the

PLAY/ENTER button.
The screen used to select the memory is
displayed.

3

Press the

FF/

 and

FR/

 buttons

to select the desired memory, and press
the

 PLAY/ENTER button to fix the

setting.

Operations during playback

To

Operation

Stop playback

Press the

STOP button.

Pause playback Press the

PAUSE button.

flashes on the display.

To resume play after pausing,
press the

PAUSE button

again.

Fast forward
(Cue)

Press and hold the

FF/

button.*

Fast reverse
(Review)

Press and hold the

FR/

 button.*

Go back to the
beginning of the
current track

Press the

FR/

 button

once.

To

Operation

Go back to
previous tracks

Press the

FR/

 button

repeatedly.**

Go to the
beginning of the
next track

Press the

FF/

 button

once.**

Go to the
beginning of
succeeding
tracks

Press the

FF/

 button

repeatedly.

If you press and hold the button, the recorder goes
forward or backward slowly at first, and then at
gradually higher speed.

** These operations are for when “EASY SEARCH” is

set to “OFF.”

When tracks are played back to the end of
the last track

When you play back or fast play back to the end of
the last track, “TRACK END” lights up for 5
seconds. When “TRACK END” goes off, the
recorder will stop at the beginning of the last track.
If you press and hold the

FR/

 button while

“TRACK END” is lit, the tracks are played back
rapidly, and normal playback will start at the point
you release the button.
If the last track is long and you wish to start
playback at a later part of the track, press and hold
the

 FF/ button to go to the end of the track

and then press the

 FR/ button while “TRACK

END” is lit to go back to the desired point.
For tracks other than the last one, go to the
beginning of the next track and then fast-rewind to
the desired point during playback.

Note

During playback, do not remove the batteries or AC
power adapter. Doing so may cause noise in audio
output from the LINE OUT (OPT) jack and

(headphone) jack.

*

Advertising