Sony DVP-NS400D - Manual (Page 24)

24
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or
DTS decoder, refer to page 21.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use .
xRecommended surround sound effects using this connection with your amplifier (receiver).
•
Dolby Surround (Pro Logic) (page 79)
z For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
∗
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a subwoofer.
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
D
D-1
D-2
LINE OUT
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L VIDEO 1
Y
P B
P R
R-AUDIO 2-L VIDEO 2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
D-2 D-1
VIDEO 1
R-AUDIO 2-L VIDEO 2
LINE OUT
R-AUDIO 1-L
5.1CH OUTPUT
WOOFER
L
R
FRONT REAR CENTER
1
2
CD/DVD player
or
Front
(R)
Front
(L)
Rear
(R)
Subwoofer
l : Signal flow
Rear
(L)
Dolby Surround amplifier (receiver)
Rear *
(mono)
Stereo audio cord
(not supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(white) (red)
to audio input
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
Center
to coaxial or optical digital input
[Speakers]
(white)
(red)