Sony DSC-G1 - Manual (Page 13)

13
GB
2 Charging the battery pack
1 Connect the cable of the AC Adaptor (supplied) to the DC IN jack of the
Cyber-shot Station (supplied).
2 Connect the power cord (mains lead) to the AC Adaptor and plug the adaptor
into the wall outlet (wall socket).
3 Attach the camera on the Cyber-shot Station.
The CHG lamp lights on, and charging starts.
When the CHG lamp turns off, charging is finished (Full charge).
[ Charging time
• Time required to charge a fully depleted battery pack (supplied) at a temperature of 25°C (77°F). Charging
may take longer under certain circumstances or conditions.
• For details on battery usable time, see page 33.
• Even if the CHG lamp is not lit, the camera is not disconnected from the AC power source (mains) as long
as it is connected to the wall outlet (wall socket). If any trouble occurs while using the adaptor,
immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
• Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
• If you do not operate the camera for a long time, disconnect the AC Adaptor both from the DC IN jack of
the Cyber-shot Station and from a wall outlet (wall socket).
• Use a commercially available AC plug adaptor, if necessary, depending on the design of the wall outlet.
Battery pack Full charge time
NP-FR1 Approx. 240 min.
v mark
CHG
lamp
ɟ
ɠ
Power cord
(mains lead) DC IN jack
AC Adaptor