Accton Technology CheetahAccess Wireless Gateway AC-IG2004W - Manual (Page 19)

Connect the System
2-7
CheetahAccess Wireless Gateway.
A wireless infrastructure can be used for access to a central database, or for
connection between mobile workers, as shown in the following figure:
Figure 2-4. Making WLAN Connections
Attach the CheetahAccess ™ Wireless Gateway to the Internet
If Internet services are provided through an xDSL or Cable modem, use unshielded
or shielded twisted-pair Ethernet cable (Category 3 or greater) with RJ-45 plugs to
connect the broadband modem directly to the WAN port on the CheetahAccess
Wireless Gateway. Use either straight-through or crossover cable depending on the
port type provided by the modem (see Appendix B). For ISDN or PSTN service,
attach the access device to the RS-232 serial port on the CheetahAccess Wireless
Gateway.
Figure 2-5. Making WAN Connections
Internet
Internet
Access
Device
CheetahAccess
Wireless Gateway
Notebook with Wireless
PC Card Adapter
PC with Wireless
PCI Adapter
Wired LAN
Wired to Wireless
Network Extension
ISP
(Primary)
DSL/Cable
Modem
ISP
(Primary or
Backup)
ISDN TA/
PSTN Modem