Accton Technology CheetahAccess Wireless Gateway AC-IG2004W - Manual (Page 28)

Configuring the CheetahAccess
™ Wireless Gateway
4-6
Valid IP addresses consist of four numbers separated by periods. The first three
fields are the network portion, and can be from 0–255, while the last field is the host
portion and can be from 1–254. However, remember not to include the gateway
address of the CheetahAccess Wireless Gateway in the client address pool.
The Domain Name is optional, but this information may be specified so that it can be
passed to the client PCs.
WAN Configuration
Specify the WAN connection type required by your Internet Service Provider, then
click “More Configuration” to provide detailed configuration parameters for the
selected connection type.
Specify one of the first three options to configure a WAN connection through the
RJ-45 port (i.e., a connection to an xDSL modem or Cable modem). Specify the
“Dial-up on Demand” option to configure a WAN connection through the serial port
(i.e., a connection to an ISDN TA or PSTN modem).
Note: If WAN connections are configured for both the RJ-45 and serial port, the serial
port will be used as a backup Internet connection if the primary RJ-45 WAN
connection fails.