Sony DSC-P7 User Manual
Page 13
filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM]
masterpage:L1-Right
model name1[DSC-P7/P9]
[3-075-896-11(1)]
13
G
e
tt
in
g star
te
d
•
The battery life and the number of images
recordable are decreased under the following
conditions:
–
At low temperatures.
–
Using the flash.
–
Turning on and off frequently.
–
Using the zoom frequently.
–
When [POWER SAVE] is set to [OFF].
–
Using the battery pack used repeatedly or
self-discharged after charging (page 97).
The POWER SAVE function
When the POWER SAVE function is
activated, you can shoot for a longer
period of time.
Set the mode dial to SET UP, and set
[POWER SAVE] in [SETUP 2] to [ON].
The factory setting is [ON] (page 94).
When the POWER SAVE
function is activated
•
The LCD screen will be darker than it is when
[POWER SAVE] is set to [OFF]. You cannot
change the settings for [LCD BACKLIGHT]
at this time (page 94).
•
When the power turns on, the Flash mode is
normally set to “
” (No flash).
•
If you want to shoot using the flash, press v
( ) on the control button, and select “ ”
(Forced flash) or Auto (page 26).
•
When shooting sill images, the focus only
works while the shutter button is pressed
down halfway.
01cov.book Page 13 Thursday, May 23, 2002 3:57 PM