Sony STR-DE185 - Manual (Page 11)

Hooking Up the Components
11
GB
AC OUTLET
AC OUTLET*
Other hookups
* The configuration and shape of AC outlets vary
according to the model and country to which the
receiver is shipped.
Connecting the AC power
cord
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
If you connect other audio/video components to
the AC OUTLET on the receiver, the receiver
will supply power to the connected component,
allowing you to turn the whole system on or off
when you turn the receiver on or off.
AC power cord
To a wall outlet
Caution
Make sure that the total power consumption of the
component connected to the receiver’s AC OUTLET
does not exceed the wattage stated on the rear panel.
Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this
outlet.
Note
If the AC power cord is disconnected for about one
week, the receiver’s entire memory will be cleared.
Clearing the receiver’s
memory
Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.
1
Turn off the receiver.
2
Hold down ?/1 for 5 seconds.
“INITIAL” appears in the display and all of
the following items are reset or cleared:
• All preset stations are reset or cleared.
• All index names (of preset stations and
program sources) are cleared.
• The master volume is set to VOL MIN.
• All adjustments made (BALANCE,
speaker system, etc.) are reset to factory
settings.