Sony HDR-AX2000 - Manual (Page 79)

79
Usi
n
g
th
e
Me
n
u
B NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
b Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
You can adjust the brightness of the
viewfinder.
B NORMAL
Standard brightness.
BRIGHT
Brightens the viewfinder screen.
b Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
B AUTO
Turns on the viewfinder while you close
the LCD panel or record in mirror mode.
ON
Always turns on the viewfinder.
AUTO
Displays the remaining recording time
available for movies when you re-enter
movie recording mode or switch to
[
SMOOTH SLOW REC ]. When the
remaining time is 5 minutes or more, the
display goes off after 8 seconds.
B ON
Always displays the remaining recording
time available for movies.
You can select where to output the display
information, such as time code.
B LCD PANEL
Outputs the information to the LCD screen
and viewfinder.
ALL OUTPUT
Outputs the information to the LCD
screen, viewfinder, HDMI output,
component output and video output.
b Notes
• Only the time code is output when [MARKER]
is set to [ON] and a marker is displayed on the
screen.
VF BACKLIGHT
VF POWERMODE
REMAINING
DISPLAY OUTPUT