Sony HDR-AX2000 - Manual (Page 90)

90
Troubleshooting (Continued)
Neither image nor sound is played back on the TV connected with the
component video cable.
• Set [VIDEO OUT] according to the requirements of the connected device (p. 74).
• When you are using the component video cable, make sure that you connect the red and white
plugs of the A/V connecting cable (p. 51).
Neither image nor sound is played back on the TV connected with the HDMI
cable.
• Pictures are not output from the HDMI OUT jack, if copyright protection signals are recorded
in the pictures.
• Signals are not output from the HDMI OUT jack when the USB jack is connected.
Neither image nor sound is played back on the TV, projector, or AV amplifier
connected with the HDMI cable.
• If you cannot view images or hear sound on the TV, projector, or AV amplifier connected
with the HDMI cable, try disconnecting and connecting the HDMI cable, or turn on your
camcorder again.
The image appears distorted on the 4:3 TV.
• This happens when viewing a movie recorded in 16:9 (wide) mode on a 4:3 TV. Select [REC/
OUT SET] t [VIDEO OUT] t [TV TYPE] t the appropriate down conversion type
(p. 74).
Black zone appears at top and bottom of a 4:3 TV screen.
• This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. This is
not a malfunction.
Connecting to TV