Surround settings menu – Sony STRDH830 User Manual

Page 65

Advertising
background image

65

GB

D:\NORM'S JOB\SONY HA\SO130042\STR-DH830_DH730_PMRF
03\4408151122_GB\GB05ENJ_STR-DH730-CEL.fm

masterpage: Right

STR-DH830/STR-DH730

4-408-151-12(2)

Adju

stin

g Setti

ng
s

Tips

• To adjust the level of all speakers at the same time,

press MASTER VOL +/– or

2

+/–. You can also

use MASTER VOLUME on the receiver.

• The adjusted value is shown on the TV screen

during adjustment.

To output test tone from each
speaker

You can output test tone from the speakers in
sequence.

1

Select “Test Tone”, then press

or

b.

2

Adjust the parameter, then press

.

• OFF
• AUTO:
The test tone is output from each

speaker in sequence.

3

Adjust the speaker level, then press

.

x D.Range Comp (Dynamic range

compression)

Lets you compress the dynamic range of the
soundtrack. This may be useful when you want
to watch movies at low volumes late at night.
Dynamic range compression is possible with
Dolby Digital sources only.
MAX: The dynamic range is compressed

dramatically.

STD: The dynamic range is compressed as

intended by the recording engineer.

AUTO: The dynamic range is applied

automatically with Dolby TrueHD source or
other source is set to “OFF”.

OFF: The dynamic range is not compressed.

Tip

“STD” is the standard setting, and enacts light
compression. Therefore, we recommend using the
“MAX” setting. This greatly compresses the
dynamic range and lets you view movies late at
night at low volumes. Unlike analog limiters, the
levels are predetermined and provide a very natural
compression.

x Distance Unit

Lets you select the unit of measurement for
setting distances.
FEET: The distance is displayed in feet.
METER: The distance is displayed in

meters.

Surround Settings menu

You can select the sound field and adjust the
effect level, etc. on the “Sound Field Setup”
screen.
For details on the sound field, see “Enjoying
Sound Effects” (page 51).

Note

The setup items you can adjust on each menu vary
depending on the sound field.

To adjust the effect type for

HD-D.C.S.

1

Select “HD-D.C.S.”, then press

or

b.

2

Select the effect you want, then press

.

HD-D.C.S. has three different types:
Theater, Dynamic and Studio. Each type
has different reflection and reverberation
sound mixture levels and is optimized to
match a listener’s room uniqueness, taste
and mood.
• Dynamic

Want to enjoy the sound effects to the full
extent, just like at the movie theaters?

Dynamic type emphasizes on the
reflection sound. Without HD-D.C.S.,
many rooms are often somewhat
reverberant but lack a spacious feeling.
This type acoustically opens up those
types of rooms and provides a spacious
and dynamism feeling equivalent to a
mastering studio.

continued

Advertising