Remote user (via x100/x200 extender), Remote user, Via x100 extender) – Adder Technology AdderView CATx EPS-S8 User Manual

Page 11

Advertising
background image



























0

Remote user (via X100/X200 extender)

Up.to.four.users.can.be.placed.a.
maximum.of.300.metres.(980.feet).
from.the.AdderView.CATx.unit..
Remote.users.are.connected.via.
an.Adder.X100.or.X200.extender.
module.and.suitable.category.5,.
5e.or.6.cabling.(with.no.crossover)..
The.AdderView.CATx.IP.models.
provide.two.remote.user.ports.

Cable lengths for remote user locations
The.maximum.length.of.cable.between.a.remote.user.and.the.AdderView.CATx.
unit.can.be.up.to.300.metres.(980.feet)..However,.bear.in.mind.that.the.overall.
distance.between.any.remote.user.and.any.computer.system.must.not.exceed.
300.metres.(980.feet)..

In.situations.where.any.computer.system.will.be.placed.a.significant.distance.
from.the.AdderView.CATx.unit,.ensure.that.the.distance.to.any.remote.user.is.
similarly.less.than.300.metres.(980.feet).....

To connect a remote user

1. Place.an.Adder.X100.or.X200.extender.unit.adjacent.to.the.remote.user.

location..

2. Attach.the.video.monitor,.

keyboard,.mouse,.power.adapter.
(and.speaker).connectors.to.the.
sockets.of.the.Adder.
X100.or.X200.
module.

3. Lay.a.suitable.length.of.category.5,.5e.or.6.cabling.between.the.Adder.

X100/X200.module.and.the.AdderView.CATx.unit..Please.refer.to.the.
section.

Cable lengths for remote user locations.opposite.

4. Attach.the.connector.of.the.cable.run.to.the.socket.of.the.Adder.X100/X200.

5. At.the.other.end.of.the.cable.run,.attach.the.cable.connector.to.one.of.the.

sockets.labelled.

CATx USER PORTS

.on.the.rear.panel.of.the.AdderView.CATx.

unit..

From mouse

From keyboard

From video monitor

From power adapter

Category , e or

 cable leading to

AdderView CATx unit

Category , e or  cable

from Adder X00/X00

module

6. Where.necessary,.use.the.in-built.video.compensation.feature.of.the.Adder.

X100/X200.module.to.eliminate.any.effects.caused.by.the.cable.run..
However,.ensure.that.the.links.between.the.computers.and.the.AdderView.
CATx.have.been.compensated.first..See.

remote user video compensation

.

for.details....

Adder X00/X00

module

Adder X00/X00

module

AdderView CATx

rear panel

Note: The AdderView
CATx model shown here
is a non-IP version. The
IP-version provides only
remote user ports 3
and 4.

Advertising