Global user (ip network port), Global user, Ip network port) – Adder Technology AdderView CATx EPS-S8 User Manual
Page 12
Global user (IP network port)
The.AdderView.CATx.IP.models.
provide.an.autosensing.Ethernet.
IP.port.that.can.operate.at.10.or.
100Mbps,.according.to.the.network.
speed..The.AdderView.CATx.IP.
models.are.designed.to.reside.quite.
easily.at.any.part.of.your.network:.
•. They.can.be.placed.within.
the.local.network,.behind.any.
firewall/router.connections.to.the.Internet,.or
•. They.can.be.placed.externally.to.the.local.network,.on.a.separate.sub-
network.or.with.an.open.Internet.connection....
Wherever.in.the.network.an.AdderView.CATx.IP.is.situated,.you.will.need.to.
determine.certain.configuration.issues.such.as.address.allocation.and/or.firewall.
adjustment.to.allow.correct.operation..Please.refer.to.
.within.
the.Configuration.chapter.for.more.details..
IMPORTANT: When an AdderView CATx IP is accessible from the public Internet
or dial up connection, you must ensure that sufficient
are
employed.
IP network link
To connect the Global user (IP network) port
1. Depending.upon.where.in.the.network.the.AdderView.CATx.IP.is.being.
connected,.run.a.category.5,.5e.or.6.link.cable.from.the.appropriate.hub.or.
router.to.the.AdderView.CATx.IP.unit.
2. Connect.the.plug.of.the.link.cable.into.the.IP.port.on.the.front.panel.of.the.
AdderView.CATx.IP.unit.
3. Configure.the.network.settings.as.appropriate.to.the.position.of.the.
AdderView.CATx.IP.within.the.network.-.see.
.for.details..